Review: HJC RPHA-MAX Modular Helmet

Call me loyal, but every helmet I've worn has been made by HJC. I'm not saying they're the highest quality brand available, but I am saying they are probably the best value helmet brand you can buy.

My first helmet was an HJC SyMax, purchased at a local motorcycle dealership a day before my MSF Basic Rider's Course back in September, 2006. It was affordable, comfortable, and had a basic set of features that suited my riding needs.

After a few years, I upgraded to the HJC SyMax II, the updated model of the SyMax. It had increased features and was even more comfortable. That helmet has been with me for over 30,000 miles and has served me well.

Many people feel that once a helmet has been worn for three years, it's time to replace them. This is because the padding inside compresses and apparently moisture and exposure to the elements weakens the helmet's ability to protect your noggin in an involuntary get-off.

The logical replacement choice was the SyMax III. But there was another option available, and after reading a lot of reviews and analyzing the available features, I decided to get the HJC RPHA-Max.

It is a higher-end modular helmet, costing almost $150 more than the SyMax III, but it had a feature set and level of quality that I was looking for. I ride 10,000 miles a year, in all kinds of conditions, and I wanted a helmet that could meet my needs.

The RPHA-Max has a slightly more neutral shape and is sized a bit smaller than the SyMax series, so I ordered a medium instead of a small. That was a good call -- it fits my head well with no hot spots. The fit is a little different, however. The bottom of the helmet seems to be closer to my shoulders and this makes it slightly more difficult to swivel my head around. I still have a full turning radius, but it takes a bit more effort at the extremes. The chin bar also sits slightly closer to my mouth. What's weird about this helmet is that it has the same smell inside as a new car.

The chin skirt is a mixed blessing. It blocks noise and airflow, which is good on cold rides, but it blocks airflow, which is bad on warm rides. Once I seat the chin bar down into its locked position, I sometimes need to reach up with my finger tip and pull the chin skirt down off my chin into it's intended underneath position.

When riding a bike with a windscreen, the helmet is quiet and stable. On my V-Strom 650, I now have the quietest ride of any helmet I've worn. When riding my 2012 Suzuki GSX-R750, however, things change. I noticed my head position drastically changes the noise level in the helmet. If I'm facing directly forward, it's quiet. If my head is titled down at all -- like I'm trying to touch my chin to my chest -- it gets very noisy around the face shield. If you ride an unfaired bike that has a neutral seating position, no worries. The RPHA-MAX is quiet and rock stable. If you tilt your head down at all, the aerodynamics change at a very specific angle and it gets noisy. Considering this, I wouldn't recommend this helmet for those riding race-replica sport bikes (most folks that ride these type of bikes don't wear modular helmets to begin with, so this issue may be moot).

The visor has excellent horizontal peripheral visibility, but slightly reduces the bottom portion of the vertical peripheral field of view. This means when I'm riding, I now have to tip my head down slightly to get a full view of my V-Strom's speedometer. I never had to do that with my SyMax or SyMax II. The upper quadrant of my vertical field of view is about the same; no restriction of view.

The visor has outstanding clarity, but when I bring the built-in sun shade down, some distortion occurs. The main visor now has a central grab point (and lock!) instead of offset to the left. This means I can raise my visor with either hand. I was able to grab the visor lift point okay while wearing my Cortech Scarab winter gloves. Although I suspect the visor has several detents, in actual use it seems I can place the visor in any position I want and it will stay there.

Top ventilation on the RPHA-Max is outstanding. A simple flick of the switch on the top of the helmet brings immediate and noticeable airflow across the top of my head. I can notice it even when wearing a bandana or other head covering inside the helmet (which I usually do to absorb sweat). This will be a very handy feature during summer rides.

The helmet is lightweight, making my previous helmet, the SyMax II, feel heavy by comparison. It feels more snug around my cheeks and neck, and despite having a slightly different internal shape, it still fits my head comfortably. I'd say the RPHA-MAX has a neutral shape. The noise level is pleasant (I wear earplugs). Overall, the helmet feels like more of a precision instrument than its predecessors.

The visor is relatively easy to remove and put back on. Since it's a Pinlock type and I have the anti-fog Pinlock insert, I don't need to take it off to apply shaving cream -- the poor-man's anti-fog solution. This is my first use of a Pinlock visor and I absolutely love it. I've since ordered a Pinlock visor for my HJC CS-R2 helmet, worn when riding my 2012 Suzuki GSX-R750.

One of my complaints of the SyMax series was the visor didn't form a tight seal against the brow of the helmet, and this allowed rain to run down the inside of the visor. The RPHA-Max appears to form a tight seal all the way around, and so far it has kept the rain out.

UPDATE 1-02-2014

I've worn this helmet for over 5,000 miles in all sorts of weather conditions and I would say it has continued to exceed my expectations. It is versatile and comfortable and has held up without any issues. It has done a good job of keeping water out when riding in the rain, and the Pinlock insert has been wonderful at preventing fogging on the inside of the visor. As I have stated before, this helmet is an excellent value and if I needed to get a new helmet, I'd buy another HJC RPHA-MAX without hesitation to replace it.

UPDATE 4-17-2013

Removing the chin skirt is an easy process (just follow the simple directions). Doing so is good when you're riding in warm weather but perhaps not so good when riding in cold weather. On my commute in this morning, it was 34 degrees. Minus the chin skirt, a fair amount of cold air circulated across my face and made my eyes water for several minutes until they got used to it. I placed my glove under my chin to replicate the chin skirt I had removed the night before and the airflow stopped immediately.

I also added the included anti-fog Pinlock insert. It was easy to put into place (as you might imagine), didn't reduce clarity at all, and eliminated fogging entirely during my cold morning commute. Yay! No more rubbing shaving cream on the inside of my face shield!

Review: Hilleberg Nammatj 3 GT tent

My previous tent, a 3-person dome from Cabela's, was getting long in the tooth and lacked some features I wanted in a motorcycling tent. After doing a lot of research, and realizing that I'd wasted a lot of money buying cheap tents in the past, I decided to get the best tent I could and stop this repeat purchasing madness.

I chose the Nammatj 3 GT tunnel tent by Hilleberg.

The Nammatj is somewhat expensive, costing me $795 for the tent and $96 for the matching footprint. I purchased both online from BackcountryGear.com, a retailer based in Eugene, Oregon, and received the gear the very next day after ordering -- with free shipping! As my review will show, it's not about the cost, it's about getting more than you paid for. That's how I define value, and the Hilleberg delivers value in spades.

Unlike a free-standing dome tent, the Nammatj is a tunnel design that requires staking down. The downside to this is you can't pick up the tent and relocate it to fine-tune your spot. This is a minor issue, however, as you merely need to pick your spot a bit more carefully -- which is something I do anyway.

As you can see in the picture, the tent has two chambers, the sleeping quarters behind the yellow door and the storage 'mud room' just inside the door. There are vents fore and aft that provide a surprising amount of ventilation. Because they are sloped down, you can open them even in bad weather.

The matching footprint has dongles that let you tie it down at key points around its perimeter. This prevents the footprint from moving around once it is in place under the tent. The footprint packs up to the size of a hardback novel when folded, or a can of Fosters when rolled.

The tent itself can be set up in the rain without worrying about getting the inside wet. My previous dome tent had a mesh no-see-um material for the roof, so setting it up in the rain got the inside wet. It didn't become weatherproof until I attached the external rain fly. The Nammatj doesn't have a separate fly; the tent material itself forms the weather barrier. The inner tent (in yellow) is actually attached to the outer tent using a series of dongles and can be removed, making the outer tent just a shell. This is great versatility.

When using this tent, it becomes clear the designers at Hilleberg thought of everything. The attention to detail is impressive and the craftsmanship is superb. I expect this tent to last many years.

It took me 15 minutes to set up the tent for the first time, aided by watching a video on Hilleberg's web site ahead of time. Now that I have practiced, I could probably get the tent erected in under 10 minutes. Break-down takes even less time.

Everything goes into a stuff sack that easily fits on top of my waterproof duffel on the passenger seat of my Suzuki V-Strom. It's too large to fit into a side case or top case, however. The tent is too heavy for backpacking, but that's not why I bought it. If that was a requirement, I would have purchased the Nammatj 3, which is a single chamber tent minus the front 'mud room' chamber.

After spending a night in the Nammatj, I can say the purchase price is easily forgotten and the tent quickly becomes a joy to use. For motorcyclists looking to save money on motels, or those simply wishing to enjoy the outdoors, I heartily recommend Hilleberg tents in general, and the Nammatj 3 GT specifically.

V-Strom Mid-life Maintenance

I took my 2007 Suzuki V-Strom DL650 to the shop this week for some mid-life maintenance. It now has 53,000 miles and other than a faulty TPS sensor, it's never had a thing go wrong with it. Think about that for a second. That's the equivalent distance of riding twice around the planet with only a single electronic sensor going bad.

I'm having the coolant flushed and the radiator, hoses and clamps inspected. It's getting some new shoes, another pair of Metzeler Tourance tires. I prefer Shinko 705s, as they have quite a bit more grip, especially on wet pavement, and a bit more off-road traction. However, I can only get about 5,000 miles out of a rear Shinko; the Metzelers give me 10,000 miles, which will last me all season.

I'm also getting the battery replaced, not because of age but because I ran the current unit down by leaving my Garmin Zumo 220 GPS plugged in over night. It draws current even when powered off. Speaking of which, I'm having the shop re-route the GPS' power cord to a switched circuit. This will prevent power from going to the GPS when the ignition is off.

Finally, I'm having braided stainless steel brake lines installed, replacing the factor rubber hoses.

Hanging off up the river

We've had two dry days in a row in Western Oregon and I've taken advantage of it to put some miles on the GSX-R750. I rode it to work on Friday, carrying my gear in my MotoCentric soft bags. They are light, functional, and look fantastic. I rode the long way home, following the Sandy River through Springdale, past Oxbow Park, then through the rural communities of Aims and Bull Run before emerging back up the hill to Sandy and home.

Saturday I took the Gixxer up the Clackamas River on Highway 224 to Ripplebrook Ranger Station. It was overcast and chilly up the river valley but the pavement was mostly dry. There was only a smattering of sanding gravel in the center of each lane on the last few miles before reaching the turn-around point.

The ride wasn't just for fun (although it certainly was that). I was specifically practicing my right-hand turns. To counterstear, you push right to turn right, and push left to turn left. The problem with pushing right to turn right is that's where the throttle is. You don't want your pushing to affect your throttle input. So how do you push without pushing?

I practiced two techniques. The first was gripping the tank with my knees and keeping my upper body directly lined up with the bike; i.e. no hanging off. This works fine for slower cornering, but doesn't work if you jack up the speed around the turn.

The second technique was to lean my body to the right, hanging half of my butt cheek off the seat, and supporting my body by pressing the inside of my left leg and my left elbow against the tank. This removed weight on my right wrist. I made sure I was supporting myself enough by flexing my right hand and ensuring I had a light touch on the grip.

After riding 80 miles of a decent set of turns, it started to become easier. By the time I was heading home I was easily able to double the posted corner speed with a great deal of control and comfort.

Getting paid to ride

I work in Gresham, Oregon but we have a satellite office in Lacey, Washington. I needed to install a new server in that office so I used the opportunity to ride there on my 2007 Suzuki V-Strom 650 yesterday. I left home at 7 AM and got there shortly after 9 AM. It was a chilly ride, never getting over 40 degrees until late morning. Other than some chilly toes and finger tips, my Aerostich Darien jacket and Firstgear Kathmandu pants did a great job keeping me warm.

The V-Strom ran perfectly, too. It has a neutral seating position and good coverage with the Givi after-market windscreen (and Madstad windshield bracket) and both combined to make it a comfortable ride.

By the time I got back home at 5:30 PM I had ridden 284 miles round trip. That's easy to do on a 'Strom.

Trip Itching

No, I'm not talking about frustrating skin conditions when traveling long distances on a motorcycle. I'm talking about itchy feet, the desire to travel that occurs in the late winter months. I've spent a lot of time indoors and haven't taken any overnight or multi-day rides since the Fall and I'm feeling a little stir-crazy.

I have some trip ideas for the upcoming riding season -- scratch that. Let's call it trip season, since I ride all year long. One includes a jaunt up into southern British Columbia, another involves a fair bit of off-road adventure riding on the V-Strom. Yet another idea is to take the same route of last June's 5,000 mile ride to Colorado, but in reverse order. Every given road you encounter provides two experiences, and it's a good idea to ride it in both directions to experience each.

My V-Strom has 53,000 miles on it and I've got some major preventative maintenance scheduled in the coming weeks. The bike has been rock solid reliable and preventative maintenance is the key to making it so. I'm also just a few miles shy of 3,000 on my GSX-R750, and I'm gearing up for some overnight trips on that as well. So far it's only been used for local day rides.

Although the plans haven't firmed up yet, 2013 looks to be a high mileage, high smiles trip year.

Chains and frost

Saturday I pulled both bikes out into the driveway. It was chilly, in the low 30's, but the sun was shining. I gave the chains on each bike a thorough cleaning, then added fresh lubrication. I ran the engines for 10 minutes, and using the center stand on the V-Strom and the paddock stand for the Gixxer, was able to run the bike in gear.

I rode my V-Strom to work last week so it received it's once-a-week maintenance ride, but my Gixxer hadn't received any forward momentum love. I decided to suit up and zip into Gresham and back on the sport bike. It was good to get it out onto the road, although anywhere shade crossed the pavement I encountered a frosty road surface. Those kind of rides require a mellow throttle and brake application.