Ride Report: Day 6: Smithers, BC to Williams Lake, BC

On my way back south toward home, I spaced out my daily rides a little better. This time I rode a bit past Quesnel and stayed in the Ramada Inn in Williams Lake instead. It was adequate; I prefer Best Westerns and most Super 8. I did some light maintenance on my gear to clean it up, showered and took a nap, then had dinner. The ride to Williams Lake was sunny and pleasant except for a head wind that really buffeted my helmet around (HJC RPHA-Max; see my review elsewhere on this blog).

Stampede Days is an annual event in Williams Lake and the morning I left it seemed everyone I saw was wearing a cowboy hat, including the waitress during breakfast.

Review: HJC RPHA-MAX Modular Helmet

Call me loyal, but every helmet I've worn has been made by HJC. I'm not saying they're the highest quality brand available, but I am saying they are probably the best value helmet brand you can buy.

My first helmet was an HJC SyMax, purchased at a local motorcycle dealership a day before my MSF Basic Rider's Course back in September, 2006. It was affordable, comfortable, and had a basic set of features that suited my riding needs.

After a few years, I upgraded to the HJC SyMax II, the updated model of the SyMax. It had increased features and was even more comfortable. That helmet has been with me for over 30,000 miles and has served me well.

Many people feel that once a helmet has been worn for three years, it's time to replace them. This is because the padding inside compresses and apparently moisture and exposure to the elements weakens the helmet's ability to protect your noggin in an involuntary get-off.

The logical replacement choice was the SyMax III. But there was another option available, and after reading a lot of reviews and analyzing the available features, I decided to get the HJC RPHA-Max.

It is a higher-end modular helmet, costing almost $150 more than the SyMax III, but it had a feature set and level of quality that I was looking for. I ride 10,000 miles a year, in all kinds of conditions, and I wanted a helmet that could meet my needs.

The RPHA-Max has a slightly more neutral shape and is sized a bit smaller than the SyMax series, so I ordered a medium instead of a small. That was a good call -- it fits my head well with no hot spots. The fit is a little different, however. The bottom of the helmet seems to be closer to my shoulders and this makes it slightly more difficult to swivel my head around. I still have a full turning radius, but it takes a bit more effort at the extremes. The chin bar also sits slightly closer to my mouth. What's weird about this helmet is that it has the same smell inside as a new car.

The chin skirt is a mixed blessing. It blocks noise and airflow, which is good on cold rides, but it blocks airflow, which is bad on warm rides. Once I seat the chin bar down into its locked position, I sometimes need to reach up with my finger tip and pull the chin skirt down off my chin into it's intended underneath position.

When riding a bike with a windscreen, the helmet is quiet and stable. On my V-Strom 650, I now have the quietest ride of any helmet I've worn. When riding my 2012 Suzuki GSX-R750, however, things change. I noticed my head position drastically changes the noise level in the helmet. If I'm facing directly forward, it's quiet. If my head is titled down at all -- like I'm trying to touch my chin to my chest -- it gets very noisy around the face shield. If you ride an unfaired bike that has a neutral seating position, no worries. The RPHA-MAX is quiet and rock stable. If you tilt your head down at all, the aerodynamics change at a very specific angle and it gets noisy. Considering this, I wouldn't recommend this helmet for those riding race-replica sport bikes (most folks that ride these type of bikes don't wear modular helmets to begin with, so this issue may be moot).

The visor has excellent horizontal peripheral visibility, but slightly reduces the bottom portion of the vertical peripheral field of view. This means when I'm riding, I now have to tip my head down slightly to get a full view of my V-Strom's speedometer. I never had to do that with my SyMax or SyMax II. The upper quadrant of my vertical field of view is about the same; no restriction of view.

The visor has outstanding clarity, but when I bring the built-in sun shade down, some distortion occurs. The main visor now has a central grab point (and lock!) instead of offset to the left. This means I can raise my visor with either hand. I was able to grab the visor lift point okay while wearing my Cortech Scarab winter gloves. Although I suspect the visor has several detents, in actual use it seems I can place the visor in any position I want and it will stay there.

Top ventilation on the RPHA-Max is outstanding. A simple flick of the switch on the top of the helmet brings immediate and noticeable airflow across the top of my head. I can notice it even when wearing a bandana or other head covering inside the helmet (which I usually do to absorb sweat). This will be a very handy feature during summer rides.

The helmet is lightweight, making my previous helmet, the SyMax II, feel heavy by comparison. It feels more snug around my cheeks and neck, and despite having a slightly different internal shape, it still fits my head comfortably. I'd say the RPHA-MAX has a neutral shape. The noise level is pleasant (I wear earplugs). Overall, the helmet feels like more of a precision instrument than its predecessors.

The visor is relatively easy to remove and put back on. Since it's a Pinlock type and I have the anti-fog Pinlock insert, I don't need to take it off to apply shaving cream -- the poor-man's anti-fog solution. This is my first use of a Pinlock visor and I absolutely love it. I've since ordered a Pinlock visor for my HJC CS-R2 helmet, worn when riding my 2012 Suzuki GSX-R750.

One of my complaints of the SyMax series was the visor didn't form a tight seal against the brow of the helmet, and this allowed rain to run down the inside of the visor. The RPHA-Max appears to form a tight seal all the way around, and so far it has kept the rain out.

UPDATE 1-02-2014

I've worn this helmet for over 5,000 miles in all sorts of weather conditions and I would say it has continued to exceed my expectations. It is versatile and comfortable and has held up without any issues. It has done a good job of keeping water out when riding in the rain, and the Pinlock insert has been wonderful at preventing fogging on the inside of the visor. As I have stated before, this helmet is an excellent value and if I needed to get a new helmet, I'd buy another HJC RPHA-MAX without hesitation to replace it.

UPDATE 4-17-2013

Removing the chin skirt is an easy process (just follow the simple directions). Doing so is good when you're riding in warm weather but perhaps not so good when riding in cold weather. On my commute in this morning, it was 34 degrees. Minus the chin skirt, a fair amount of cold air circulated across my face and made my eyes water for several minutes until they got used to it. I placed my glove under my chin to replicate the chin skirt I had removed the night before and the airflow stopped immediately.

I also added the included anti-fog Pinlock insert. It was easy to put into place (as you might imagine), didn't reduce clarity at all, and eliminated fogging entirely during my cold morning commute. Yay! No more rubbing shaving cream on the inside of my face shield!

Latest gear: HJC CS-R2 helmet and Garmin Zumo 220 GPS

When you ride as much as I do, no matter how well you take care of your gear it will eventually wear out. So is the case with my Garmin Zumo 450 GPS and my HJC SyMax II modular helmet.

My Zumo 450 GPS partially crapped out in Nevada on a recent 5,000 mile trip. It still showed my current location, speed, elevation, etc. but the touch screen stopped registering my input. The unit had been reliable although it occasionally became confused, as most GPS units are prone to be from time to time. I had to navigate the rest of the trip the hard way, using paper maps and turn logs that I would plot out the night before.

Getting around is easy enough the old fashioned way, but a GPS unit on your bike is very handy in some other ways. When you're in a city, they can efficiently guide you to nearby gas stations, restaurants, and motels. In larger cities, they help you find your way through the concrete jungle to critical junctions and highways leading out of town. A GPS can also tell you how far you are from the nearest gas station, which is invaluable when determining if you should fuel up now or head on down the road.

Garmin Zumo 220

I replaced it with a newer model, it's little brother, the Zumo 220. It is a no-frills unit that gets the job done with the features I need. Unlike the previous unit, the 220 uses a mini-USB connector to attach to the bike's power. Rather than snapping it into its mounting cradle, you must first plug the mini-USB connector into the back of the unit, then lock it into the cradle. This is an extra step, and it makes me miss the docking station used by the 450.

On the plus side, the 220 seems to lock onto satellites much quicker and the display is easy to see. I've yet to rely on it for city navigation or route plotting, but most of the functionality I need seems to be present.

HJC CS-R2 Storm Helmet

My first helmet was the HJC SyMax. It lasted about two years before an upgraded model came out, the SyMax II. Of course I upgraded, even though my old helmet was still functional. The SyMax II was comfortable and versatile and has served me well for several years and tens of thousands of miles. One of the drawbacks to both models, however, was an ill-fitting face shield. During moderate to heavy rain, water would run down the inside of the face shield because the top of the shield didn't seat completely against the rubber gasket across the brow of the helmet body. On especially cold rides I could feel the chilly air coming through that gap and onto my cheeks.

I'm loyal to the brand, both because of its value and because I know that their head shape fits me. My SyMax II has been showing its age lately and helmets should be replaced after 3-5 years of use anyway -- due to the gradual collapse of the interior padding, lessening its protective effectiveness in a crash -- so I shopped around for a suitable replacement.

This time I decided to go with a full-face model instead of a modular design. I wanted reasonable cost and features, no internal flip-down sun shade, and DOT-only certification; no Snell rating (Snell rated helmets subject the human skull to higher G-forces in an impact event; look it up). I also wanted a helmet with a design pattern on the outside rather than the plain colors I've been wearing to date.

I settled on the HJC CS-R2 "Storm" in grey. It is lightweight, has the feature set I wanted, and was surprisingly inexpensive. I paid $98 for it with free shipping from Motorcycle-Superstore.com.

I've ridden about 500 miles with it so far and really like it. I have to get used to the fact that I can't flip up the whole front part of the helmet like I could with my modular SyMax II. One downside is the face shield only has three detent positions; the first is barely open, which is great when fogging occurs, the other is in the middle and the top is all the way up. I wish it had 5 positions instead of three. The fit is fairly tight around my cheeks, so I find I ride with my mouth slightly open -- this narrows my cheeks, basically. I'm assuming the padding will deflate slightly over time. The size was spot on; I wear a small in all three HJC models I've owned. There are no hot spots, either. Although the helmet is quiet, there is a slight amount of wind noise from the top air vents, even when the vent is closed. When I raise my head into the full oncoming rush of air above my wind screen I can tell that a decent amount of air passes through the helmet. This is handy when riding in hot weather.

I've yet to wear the CS-R2 in rainy conditions, but close examination (and online reviews) show the face shield is pressed firmly against the brow gasket. Although I haven't treated the inside of the face shield yet, it fogs up very easily. I also noticed the clear face shield that comes with the helmet seems to have a slight gradation of tinting or perhaps polarization from top to bottom. It's subtle. I've ordered an additional shield, the HJ-09 in "Silver", from Motorcycle-Superstore.com, to provide better tinting in sunny conditions.

Review: HJC Sy-Max II modular helmet

Up to this point in my riding career, I've been wearing an HJC CL-MAX modular helmet. I paid $199 for it at Gresham Honda in Gresham, Oregon and have been very happy with it. It's been comfortable and has performed adequately. It has some room for improvement, however, as can be expected in a budget helmet.

The air flow with the vents open is minimal, and when closed the vents rattle. The face shield doesn't form a tight seal against the gasket surrounding the helmet itself and during top-down rain showers water can run down inside the face shield. The liner isn't removable, either.

When HJC came out with the Sy-Max II, the CL-MAX's more full-featured big brother, I was excited after reading numerous glowing reviews. I finally found one with a great price, $209 at NewEnough.com, and placed my order. It arrived two days later (shipped from Medford, Oregon).

The Sy-Max II has a moisture-wicking liner that's removable and washable. It's also much softer to the touch than the CL-MAX. I bought the same size Sy-Max II as I wear in the CL-MAX without having tried it on first (the dealerships in my area can't keep the darn things in stock, they sell so fast!). It's a bit tighter around my cheeks and seems to ride higher on my head, but it fits as expected. I haven't figured out yet what my exact head shape is, but I suspect it's oval. The HJC line seems to fit me well, with only one slight pressure point on the crown of my head, immediately above my forehead. It's possible the padding in my CL-MAX has collapsed slightly making it feel more loose than the brand new Sy-Max II.

I wore it for the first time on my ride to work this morning. My first impression was that the amount of air flow is substantially greater than the CL-MAX. I especially notice it flowing from the top down over my ears, which is surprising but pleasant nonetheless. It's as quiet, if not slightly quieter, than the CL-MAX. I wear foam ear plugs every time I ride so that impression is rather subjective and helmet noise is not much of a factor for me as a result.

The overall fit is comfortable but that opinion may change once I've worn it for several hours in a stretch on one of my longer trips. 20 minutes into the office isn't much of a test as far as fit is concerned. So far I haven't noticed any hot spots.

I also noticed the face shield forms a tight seal against the gasket surrounding the face hole. I can assume it will perform very well when riding in the rain. The chin latch that opens up the modular portion of the helmet is large and easy to operate. The chin bar doesn't stick up as much above the helmet when in the open position and has a very solid feel to it. It feels more substantial and solidly built than the CL-MAX.

The final feature I especially like is the drop-down integrated sun-screen. A slider across the ridge of the top of the helmet drops it into one of three positions. A single button at one end of the slider releases it, allowing it to snap back into the up and unused position. You basically tap the top of the helmet with your finger and snap! Back it goes, out of your way. I'll have to see how it performs when riding into the sunset.

Considering the price I paid and the features offered, my impression is this helmet provides an outstanding value. Time will tell how it holds up and performs under more diverse and longer riding conditions, but it's definitely looking promising so far. More to come.